1.75mm PLA filament agba anụnụ anụnụ
Njirimara ngwaahịa
| Brand | Torwell |
| Ihe onwunwe | Ọkọlọtọ PLA (NatureWorks 4032D / ngụkọta-Corbion LX575) |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Ebe nchekwa | Akọrọ na ventilashion |
| DỊtọ ntọala | 55˚C maka awa 6 |
| Ihe nkwado | Tinye ya naTOrwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctnakpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị:
| Agba agba | Ọcha, Black, Red, Blue, Yellow, Green, Nature, |
| Agba ndị ọzọ | Silver, Grey, Skin, Gold, Pink, Purple, Orange, Yellow-Gold, Wood, Christmas green, Galaxy blue, Sky blue, transperent |
| Usoro fluorescent | Fluorescent Red, Fluorescent Yellow, Fluorescent Green, Fluorescent Blue |
| Usoro ìhè | Green na-egbuke egbuke, na-acha anụnụ anụnụ |
| Usoro na-agbanwe agba | Akwụkwọ ndụ akwụkwọ ndụ na-acha anụnụ anụnụ ruo odo odo, Blue ruo ọcha, Purple ka Pink, Grey ruo White |
| Nabata Agba PMS ndị ahịa | |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta 1.75mm PLA filament nwere desiccant na ngwugwu vaccum
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri enwere ike)
Igbe 8 kwa katọn (katọn nha 44x44x19cm)
Uru anyị
a) Onye nrụpụta, na filament na ngwaahịa ntụaka, ọnụahịa asọmpi.
b) 10 afọ ahụmahụ na-arụ ọrụ na OEM si dị iche iche ihe.
c).QC: 100% nyocha.
d) kwenye sample: tupu ịmalite mmepụta oke, anyị ga-ezigara ndị ahịa ihe nlele mbụ maka nkwenye.Anyị ga-agbanwe ebu ruo mgbe ndị ahịa afọ ojuju.
e).Ekwenyere obere iwu.
f).QC siri ike na ogo dị elu.
g).Usoro mmepụta ihe nke ukwuu.
h).Ụdị ngwaahịa OEM dị iche iche.
| Njupụta | 1.24 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 3.5(190℃/2.16kg) |
| Okpomọkụ agbagọ | 53℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Elongation na ezumike | 11.8% |
| Ike Flexural | 90 MPa |
| Modulus Flexural | 1915 MPa |
| IZOD Mmetụta Ike | 5.4kJ/㎡ |
| Ịdị ogologo | 4/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder(℃) | 190-220℃Akwadoro 215℃ |
| Okpomọkụ bed(℃) | 25-60 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | Na 100% |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Nhọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
Dee ozi gị ebe a ziga anyị ya
