Filament PLA nke a na-ebipụta nke ọma na 3D
| Akara aha | Torwell |
| ihe | PLA ọkọlọtọ (NatureWorks 4032D / Total-Corbion LX575) |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.02mm |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 55˚C maka awa isii |
| Ihe nkwado | Tinye Torwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
| Ngwugwu | 1kg/spool; 8spools/ctn ma ọ bụ 10spools/ctnAkpa plastik emechiri emechi nwere ihe nhicha mmiri |
Agba Ndị Ọzọ
Agba dị:
| Agba nkịtị | Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Okike, |
| Agba ọzọ | Ọlaọcha, Isi awọ, Akpụkpọ ahụ, Ọlaọcha, Pink, Ọcha odo odo, Oroma, Ọlaọcha edo edo, Osisi, Akwụkwọ ndụ Krismas, acha anụnụ anụnụ Galaxy, acha anụnụ anụnụ eluigwe, Na-acha ọcha |
| Usoro Fluorescent | Uhie Na-acha Ọcha, Odo Na-acha Ọcha, Akwụkwọ Ndụ Na-acha Ọcha, Anụnụ Na-acha Ọcha |
| Usoro na-egbuke egbuke | Akwụkwọ Ndụ Na-egbukepụ egbukepụ, acha anụnụ anụnụ na-egbukepụ egbukepụ |
| Usoro mgbanwe agba | acha anụnụ anụnụ akwụkwọ ndụ akwụkwọ ndụ gaa odo akwụkwọ ndụ, acha anụnụ anụnụ gaa ọcha, acha odo odo gaa pink, isi awọ gaa ọcha |
| Nabata agba PMS nke ndị ahịa | |
Ihe ngosi nlereanya
Ngwugwu
1kg mpịakọta Transparent PLA Filament nwere ihe na-ekpo ọkụ na ngwugwu vaccum.
Ngwunye ọ bụla dị n'ime igbe nkeonwe (igbe Torwell, igbe Neutral, ma ọ bụ igbe ahaziri ahazi dị).
Igbe 8 kwa katọn (nha katọn 44x44x19cm).
Ụlọ ọrụ
Ajụjụ Ndị A Na-ajụkarị
A: Anyị bụ ndị nrụpụta maka eriri 3D ihe karịrị afọ 10 na China.
A: North Amercia, South Amercia, Europe, Afrịka, Eshia wdg.
A: Ọ na-abụkarị ụbọchị 3-5 maka ihe nlele ma ọ bụ obere iwu. 7-15 ụbọchị ka ego ahụ gachara, a na-anata ya maka nnukwu iwu. Ga-akwado oge nkọwa zuru ezu mgbe ị tinyere iwu ahụ.
A: Nkwakọ ngwaahịa mbupụ ọkachamara:
1) Igbe agba Torwell
2) Nkwakọ ngwaahịa na-anọpụ iche na-enweghị ozi ụlọ ọrụ ọ bụla
3) Igbe akara nke gị dịka arịrịọ gị si dị.
A:1) N'oge nhazi, onye ọrụ igwe na-arụ ọrụ na-enyocha nha ahụ n'onwe ya.
2) Mgbe emechara mmepụta ahụ, a ga-egosi QA maka nyocha zuru oke.
3) Tupu ebupu ya, QA ga-enyocha ya dịka ọkọlọtọ nlele ISO si dị maka mmepụta oke. Ga-enyocha ya nke ọma 100% maka obere ọnụọgụgụ.
A: EX-WORKS, FOB, CIF, C&F,DDP,DDU, wdg.
| Njupụta | 1.24 g/cm3 |
| Ndepụta Mmiri Na-agbaze (g/10min) | 3.5(190℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 53℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Ogologo oge na ezumike | 11.8% |
| Ike nke Flexural | 90 MPa |
| Modulu Flexural | 1915 MPa |
| Ike Mmetụta IZOD | 5.4kJ/* |
| Ogologo oge | 4/10 |
| Mbipụta | 9/10 |
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 190 – 220℃Akwadoro 215℃ |
| Okpomọkụ akwa (℃) | 25 – 60°C |
| Nha nozulu | ≥0.4mm |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 40 – 100mm/s |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
