Ejirila ákwà silk PLA 3D nke nwere agba abụọ, nke nwere pearlescent 1.75mm, egwurugwu Coextrusion
Atụmatụ Ngwaahịa
Filament Njikọ Agba Abụọ nke Torwell
N'adịghị ka eriri PLA nke na-agbanwe agba nkịtị, otu inch nke eriri 3D anwansi a bụ nke ejiri agba abụọ mee. Ya mere, ị ga-enweta agba niile ngwa ngwa, ọbụlagodi maka obere mbipụta.
Nkọwa mara mma dị nro ma na-egbuke egbuke
Ihe mere eriri igwe mbipụta 3D a ji maa mma bụ elu eriri silk PLA mara mma.
| Brand | Torwell |
| ihe | ihe mejupụtara polima Pearlescent PLA (NatureWorks 4032D) |
| Dayameta | 1.75mm |
| Nha ịbụ | 1Kg/spool; 250g/spool; 500g/spool; |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.03mm |
| LBekee | 1.75mm(1kg) = 325m |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 55˚C maka awa isii |
| Ihe nkwado | Tinye akwụkwọ naTOrwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
| Ngwugwu | 1kg/spool; 8spools/ctn ma ọ bụ 10spools/ctnAkpa plastik emechiri emechi nwere ihe nhicha mmiri |
Agba Ndị Ọzọ
Agba dị:
| Agba nkịtị | Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Ọlaọcha, Isi awọ, Ọlaedo, Oroma, Pink |
| Nabata agba PMS nke ndị ahịa | |
Ihe ngosi nlereanya
Ngwugwu
Ụlọ Ọrụ Mmepụta Ihe
Torwell, onye nrụpụta mara mma nke nwere ihe karịrị afọ 10 ahụmịhe na eriri mbipụta 3D.
RỤBA AMA
• Debe eriri ahụ ka ọ kwụ ọtọ dịka o kwere mee n'agbagọghị ya.
• N'ihi ọkụ ma ọ bụ mkpebi ngosipụta, enwere obere agba agba n'etiti foto na eriri.
• E nwere obere ihe dị iche n'etiti ụdị dị iche iche, nke mere na a na-atụ aro ka a zụta eriri zuru oke n'otu oge.
Ajụjụ Ndị A Na-ajụkarị
A: Kwenye na ikpo okwu ahụ ahaziela nke ọma, anya dị n'etiti ihe mkpuchi ahụ na elu ikpo okwu ahụ kwesịrị ekwesị, ka waya si na ihe mkpuchi ahụ pụta wee dị ntakịrị.
B: Lelee okpomọkụ mbipụta na ọnọdụ okpomọkụ nke akwa ọkụ. Okpomọkụ mbipụta akwadoro bụ 190-220°C, okpomọkụ akwa ọkụ bụkwa 40°C.
C: Elu nke ikpo okwu ahụ chọrọ nhicha ma ọ bụ ị nwere ike iji elu pụrụ iche, gluu, ihe mkpuchi ntutu wdg.
D: Nrapado nke oyi akwa mbụ adịghị mma, nke enwere ike imeziwanye site n'ịbawanye obosara ahịrị mmịpụta nke oyi akwa mbụ ma belata ọsọ mbipụta.
A: Ike nke silk pla dị ala karịa PLA, n'ihi usoro dị iche.
B: Ị nwere ike ịbawanye okpomọkụ na ọnụọgụ nke mgbidi mpụta iji nwee nrapado oyi akwa ka mma.
C. debe eriri ahụ ka ọ kpọọ nkụ iji zere imebi.
A: Oke okpomọkụ nwere ike ime ka eriri ahụ dị nro mgbe agbazechara, anyị na-atụ aro ka e belata okpomọkụ ahụ iji belata eriri.
B: Ị nwere ike ịchọta anya na ọsọ ndọghachi azụ kacha mma site na ibipụta ule eriri.
A: Jide n'aka na ị tinyere nsọtụ eriri silk pla n'ime oghere ndị ahụ ka ọ ghara ịgbagọ agbagọ oge ọzọ.
A: Biko hụ na echekwara eriri ahụ n'ime akpa ma ọ bụ igbe e mechiri emechi mgbe mbipụta ọ bụla gasịrị iji gbochie mmiri.
B: Ọ bụrụ na eriri ahụ amịkọrọ mmiri mmiri, kpọọ ya nkụ n'ime oven ruo awa 4-6 na okpomọkụ 40-45°C.
| Njupụta | 1.25g/cm3 |
| Ndepụta Mmiri Na-agbaze (g/10min) | 11.3(190℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 55℃, 0.45MPa |
| Ike ọdụdọ | 57MPa |
| Ogologo oge na ezumike | 21.5% |
| Ike nke Flexural | 78MPa |
| Modulu Flexural | 2700 MPa |
| Ike Mmetụta IZOD | 6.3kJ/* |
| Ogologo oge | 4/10 |
| Mbipụta | 9/10 |
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 190 – 220℃Akwadoro ya≤200℃nweta ìhè ka mma |
| Okpomọkụ akwa (℃) | 0 – 60°C |
| NoNha Zl | ≥0.4mm |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 30 –60mm/s; 25-45mm/s maka ihe dị mgbagwoju anya, 45-60mm/s maka ihe dị mfe |
| LOgologo Ayer | 0.2mm |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
