Green 3D filament PETG maka ndị nbipute FDM 3D
Njirimara ngwaahịa
| Brand | Torwell |
| Ihe onwunwe | SkyGreen K2012/PN200 |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Logologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| DỊtọ ntọala | 65˚C maka awa 6 |
| Ihe nkwado | Tinye ya naTOrwell HIPS, Torwell PVA |
| CNkwado nkwenye | CE, MSDS, Nweta, FDA, TUV, SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ihe ọ bụla ọzọ FDM 3D na-ebi akwụkwọ. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctn akpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị
| Agba agba | White, Black, Red, Blue, Yellow, Green, Grey, Silver, Orange, Transparent |
| Agba ndị ọzọ | Agba ahaziri dị |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta 3D filament PETG ya na desiccant na ngwugwu vaccum.
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri ahazi).
8 igbe kwa katọn (katọn nha 44x44x19cm).
Ụlọ ọrụ mmepụta ihe
Ozi ndị ọzọ
Green 3D Filament PETG maka ndị na-ebi akwụkwọ FDM 3D - mgbakwunye zuru oke na ngwa obibi akwụkwọ 3D gị.A na-eme filament a dị elu site na polyethylene terephthalate, nke a makwaara dị ka PETG, ihe copolyester mara maka ịdị ike na ịdị mfe iji.
Otu n'ime ihe ndị pụtara ìhè nke filament a bụ nguzogide ya na mgbochi na nnyonye anya, nke nwere ike ịbụ nsogbu nkịtị mgbe ị na-eji ihe ndị ọzọ eme ihe.Site na akwụkwọ ndụ akwụkwọ ndụ 3D filament PETG, ị nwere ike ịnụ ụtọ ahụmịhe mbipụta na-enweghị nchekasị na-echegbu onwe gị maka delamination na nsogbu ndị ọzọ.
Na mgbakwunye na ịbụ ndị a pụrụ ịdabere na ya, filament bụ nke FDA kwadoro, nke pụtara na ọ dị mma maka iji ngwa ndị metụtara nri.Na mgbakwunye, ọ bụ enyi na gburugburu ebe obibi, na-eme ka ọ bụrụ nhọrọ magburu onwe ya maka ndị ahịa na-eche banyere mmetụta omume ha nwere na mbara ala.
Otu n'ime nnukwu ihe gbasara Green 3D Filament PETG bụ na ọ na-arụ ọrụ nke ọma - enwere ike iji ya mepụta ọrụ obibi akwụkwọ dị iche iche, gụnyere ụdị, ihe oyiyi, na ọbụna ihe na-arụ ọrụ dị ka ekwentị ekwentị na ọla.Ọkwa dị elu nke ịdịte aka ya na-emekwa ka ọ dị mma maka imepụta akụkụ ndị kwesịrị ịdị ike ma dịgidere.
Iji filament a bipụta bụ ikuku.Enwere ike ịpụpụ ya na 220-250 Celsius ma dakọtara na ọtụtụ ndị na-ebi akwụkwọ FDM 3D na ahịa.Na mgbakwunye, agba akwụkwọ ndụ akwụkwọ ndụ na-egbuke egbuke na-agbakwụnye mmetụ ụtọ na anya na-emetụ n'ahụ na mbipụta gị.
N'ozuzu, Green 3D Filament PETG maka ndị na-ebi akwụkwọ FDM 3D bụ nhọrọ magburu onwe ya maka onye ọ bụla na-achọ filament obibi akwụkwọ 3D a pụrụ ịdabere na ya ma dị mfe iji.Site n'ịrụ ọrụ ya dị oke mma, ịdị mma gburugburu ebe obibi na agba na-adọrọ adọrọ, ọ ga-abụ ihe na-atọ ụtọ ma ndị mbido na ndị nwere mmasị ibipụta akwụkwọ 3D.
| Njupụta | 1.27 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 20 (250 ℃/2.16kg) |
| Okpomọkụ agbagọ | 65 ℃, 0.45MPa |
| Ike ọdụdọ | 53 MPa |
| Elongation na ezumike | 83% |
| Ike Flexural | 59.3MPa |
| Modulus Flexural | 1075 MPa |
| IZOD Mmetụta Ike | 4.7kJ/㎡ |
| Ịdị ogologo | 8/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 230-250 ℃ Akwadoro 240 ℃ |
| Okpomọkụ bed(℃) | 70-80 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | LOW maka ogo elu ka mma / Gbanyụọ maka ike ka mma |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Achọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
