Mpempe akwụkwọ PETG Carbon Fiber 3D, 1.75mm 800g kwa spool
Atụmatụ Ngwaahịa
| Brand | Torwell |
| ihe | Eriri Carbon Modulu dị Elu nke 20% jikọtara ya na80%PETG |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 800g/spool; 250g/spool; 500g/spool; 1kg/spool; |
| Mkpokọta nha | 1.0Kg/spool |
| Ndidi | ± 0.03mm |
| LBekee | 1.75mm(narị asatọg) =260m |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 60˚C maka awa isii |
| Ihe nkwado | Tinye akwụkwọ naTOrwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
| Ngwugwu | 1kg/spool; 8spools/ctn ma ọ bụ 10spools/ctn Akpa plastik emechiri emechi nwere ihe nhicha mmiri |
Agba Ndị Ọzọ
Ihe ngosi eserese
Ngwugwu
| Njupụta | 1.3 g/cm3 |
| Ndepụta Mmiri Gbazee (g/10min) | 5.5(190℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 85℃, 0.45MPa |
| Ike ọdụdọ | 52.5 MPa |
| Ogologo oge na ezumike | 5% |
| Ike nke Flexural | 45MPa |
| Modulu Flexural | 1250MPa |
| Ike Mmetụta IZOD | 8kJ/* |
| Ogologo oge | 6/10 |
| Mbipụta | 9/10 |
Ụlọ Ọrụ Mmepụta Ihe
Torwell, onye nrụpụta mara mma nke nwere ihe karịrị afọ 10 ahụmịhe na eriri mbipụta 3D.
Gịnị mere e ji eji eriri carbon PETG eme ihe?
Eriri Carbon Fiber PETG 3D nke e ji ebi akwụkwọ nwere oke ike na oke ibu dị elu, ike siri ike na nkwụsi ike dị elu, iguzogide nbibi na iyi na ndọda, ezigbo iguzogide kemịkalụ iji gbazee mmiri mmiri nke mineral acids, ntọala, nnu, na ncha, yana aliphatic hydrocarbons, alcohols, na ọtụtụ mmanụ.
Kedu ihe ọ bụ?
Eriri ndị ahụ dị maịkromita 5-10 n'obosara nke e ji kabọn mee. Eriri ndị ahụ na-agbakọta n'usoro dịka akụkụ nke ihe ahụ si dị. Nke a, tinyere ihe e ji mee ha, bụ ihe na-enye ihe a ihe ndị dị mma.
Gịnị Ka Ọ Na-eme?
Eriri carbon nwere ọtụtụ ihe onwunwe bara uru:
• ike siri ike dị elu
• ike nrụgide dị elu
• oke nnabata okpomọkụ
• oke iguzogide kemịkalụ
• obere ibu
obere mgbasawanye okpomọkụ
Kedu ka o si arụ ọrụ?
Iji eriri carbon eme ka plastik sie ike na-emepụta eriri mbipụta 3D nke na-egosipụta njirimara kacha mma nke eriri carbon na plastik nke a họọrọ.
Gịnị Ka Ọ Dị Mma Maka?
Ọ dị mma maka ngwa ọ bụla chọrọ ibu dị mfe na nkwụsi ike. N'ihi ihe ndị a, eriri carbon e ji eme ka eriri sie ike na-ewu ewu nke ukwuu na mbara igwe, injinịa obodo, ndị agha, na egwuregwu moto.
Ihe Na-afụcha Afụcha
Ihe a na-emebi emebi nke ukwuu n'etiti eriri mbipụta 3D. Ndị ọrụ nwere ike ịchọpụta na a na-ata ihe mkpuchi ọla nkịtị ngwa ngwa ma e jiri ya tụnyere ihe mkpuchi nkịtị. Mgbe e tinyere ya, dayameta ihe mkpuchi ahụ ga-agbasa nke ọma, onye na-ebipụta ya ga-enwekwa nsogbu ịpụpụ ya.
N'ihi nke a, a na-atụ aro nke ukwuu ka e jiri ihe e ji ígwè siri ike bipụta ihe a kama iji ígwè dị nro. Ọ na-adịkarị ọnụ ala ma dịkwa mfe itinye ya dabere na ntuziaka nke onye nrụpụta ngwa nbipute gị.
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 230 – 260℃Akwadoro 245℃ |
| Okpomọkụ akwa (℃) | 70 – 90°C |
| NoNha Zl | ≥0.5mmỌ ka mma iji Nozzles ígwè siri ike. |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 40 –80mm/s |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
