Filamenti ngwa nbipute PLA 3D 1.75mm/2.85mm 1kg kwa Spool
Njirimara ngwaahịa
Torwell PLA Filament bụ ihe na-emebi emebi na-emebi emebi yana otu ihe a na-ejikarị na teknụzụ obibi akwụkwọ 3D.A na-eme ya site na ihe ọkụkụ a na-emegharị ọhụrụ dịka starch ọka, okpete, na akpụ.Uru nke ihe PLA na ngwa mbipụta 3D bụ nke a maara nke ọma: dị mfe iji, adịghị egbu egbu, enyi na gburugburu ebe obibi, ọnụ ala, na dabara maka ndị na-ebi akwụkwọ 3D dị iche iche.
| Brand | Torwell |
| Ihe onwunwe | Ọkọlọtọ PLA (NatureWorks 4032D / ngụkọta-Corbion LX575) |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Ebe nchekwa | Akọrọ na ventilashion |
| DỊtọ ntọala | 55˚C maka awa 6 |
| Ihe nkwado | Tinye ya naTOrwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Reprap,Ultimaker, End3, Creality3D,Raise3D,Prusa i3,Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker na ihe ọ bụla ọzọ FDM 3D na-ebi akwụkwọ. |
Agba ndị ọzọ
Agba dị:
| Agba agba | Ọcha, Black, Red, Blue, Yellow, Green, Nature, |
| Agba ndị ọzọ | Silver, Grey, Skin, Gold, Pink, Purple, Orange, Yellow-Gold, Wood, Christmas green, Galaxy blue, Sky blue, transperent |
| Usoro fluorescent | Fluorescent Red, Fluorescent Yellow, Fluorescent Green, Fluorescent Blue |
| Usoro ìhè | Green na-egbuke egbuke, na-acha anụnụ anụnụ |
| Usoro na-agbanwe agba | Akwụkwọ ndụ akwụkwọ ndụ na-acha anụnụ anụnụ ruo odo odo, Blue ruo ọcha, Purple ka Pink, Grey ruo White |
| Nabata Agba PMS ndị ahịa | |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta ojii PLA filament nwere desiccant na ngwugwu agụụ
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri dị)
Igbe 8 kwa katọn (katọn nha 44x44x19cm)
Mara mma:
PLA filament na-enwe mmetụta maka mmiri mmiri, ya mere ọ dị mkpa ịchekwa ya na ebe dị jụụ, nke kpọrọ nkụ iji gbochie mmebi.Anyị na-akwado idobe filament PLA n'ime akpa ikuku na-ekpo ọkụ nke nwere ngwugwu mmiri na-ekpo ọkụ iji nweta mmiri ọ bụla.Mgbe ejighị ya, PLA filament kwesịrị ịchekwa ya n'ebe kpọrọ nkụ na-adịghị na ìhè anyanwụ.
Asambodo:
ROHS;IHE;SGS;MSDS;TUV
Kedu ihe kpatara ọtụtụ ndị ahịa ji ahọrọ TORWELL?
Torwell 3D filament etinyerela ọtụtụ mba n'ụwa.Ọtụtụ mba nwere ngwaahịa anyị.
uru Torwell:
Ọrụ
Injinia anyị ga-anọnyere gị.Anyị nwere ike inye gị nkwado teknụzụ n'oge ọ bụla.
Anyị ga na-esochi iwu gị, site na ire ere ruo n'ahịa ma na-ejere gị ozi na usoro a.
Ọnụ ahịa
Ọnụ ahịa anyị dabere na ọnụọgụ, anyị nwere ọnụahịa bụ isi maka 1000pcs.Ihe ọzọ, ike efu na fan ga-ezitere gị gị.Ụlọ kabinet ga-enwere onwe ya.
Ogo
Ogo bụ aha anyị, anyị nwere nzọụkwụ asatọ maka nyocha anyị dị mma, site na ihe na-emepụta ihe.Quality bụ ihe anyị na-achụso.
Họrọ TORWELL, ị na-ahọrọ ọnụ ahịa bara uru, ịdị mma dị elu na ezigbo ọrụ.
| Njupụta | 1.24 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 3.5(190℃/2.16kg) |
| Okpomọkụ agbagọ | 53℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Elongation na ezumike | 11.8% |
| Ike Flexural | 90 MPa |
| Modulus Flexural | 1915 MPa |
| IZOD Mmetụta Ike | 5.4kJ/㎡ |
| Ịdị ogologo | 4/10 |
| Nbipụta | 9/10 |
A na-eji PLA filament mara site na nkwụsị ya dị nro na nke na-agbanwe agbanwe, nke na-eme ka ọ dị mfe iji bipụta ya.Ọ na-enwekwa mmetụta dị ala nke ịgbawa, nke pụtara na enwere ike ibipụta ya na-enweghị mkpa maka akwa akwa.PLA filament dị mma maka ibipụta ihe na-adịghị achọ ike dị elu ma ọ bụ nguzogide okpomọkụ.Ike ike ya dị gburugburu 70 MPa, na-eme ka ọ bụrụ nhọrọ dị mma maka ịmepụta ihe na ihe ịchọ mma.Na mgbakwunye, filament PLA bụ ihe na-emebi emebi na mmekọrịta gburugburu ebe obibi, na-eme ka ọ bụrụ nhọrọ kacha mma maka nrụpụta na-adigide.
Kedu ihe kpatara ịhọrọ Torwell PLA filament?
Torwell PLA Filament bụ ezigbo akwụkwọ obibi akwụkwọ 3D nwere ọtụtụ uru ma dabara maka ngwa mbipụta 3D dị iche iche.
1. Nchekwa gburugburu:Torwell PLA filament bụ ihe na-emebi emebi nke nwere ike ịdaba na mmiri na carbon dioxide, nke na-enweghị mmetụta ọjọọ na gburugburu ebe obibi.
2. Na-adịghị egbu egbu:Torwell PLA filament anaghị egbu egbu ma dịkwa mma iji, nke agaghị emerụ ahụ ike mmadụ.
3. Agba bara ụba:Torwell PLA filament na-abịa n'ụdị dị iche iche iji gboo mkpa dị iche iche, dị ka nghọta, ojii, ọcha, ọbara ọbara, acha anụnụ anụnụ, akwụkwọ ndụ akwụkwọ ndụ, wdg.
4. Ngwa ngwa zuru oke:Torwell PLA filament dabara maka ndị na-ebi akwụkwọ 3D dị iche iche, gụnyere ndị na-ebi akwụkwọ 3D dị obere na oke okpomọkụ.
5. Ọnụ ọnụ ahịa: Torwell PLA filament dị ntakịrị na ọnụahịa, na ọbụna ndị mbido nwere ike ịzụta ma jiri ya mee ihe ngwa ngwa.
| Okpomọkụ Extruder(℃) | 190-220℃Akwadoro 215℃ |
| Okpomọkụ bed(℃) | 25-60 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | Na 100% |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Nhọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
Ihe Torwell PLA bụ polymer organic nwere ezigbo nkwụsi ike na mmiri.Na mbipụta 3D, ihe PLA dị mfe ikpo ọkụ ma na-akpụzi ya, ọ dịghịkwa enwe ike ịlụ ọgụ, na-ebelata ma ọ bụ na-emepụta afụ.Nke a na-eme ihe Torwell PLA ka ọ bụrụ ihe kacha amasị maka ndị mbido mbipụta 3D na ndị na-ebi akwụkwọ 3D ọkachamara.
