PLA 3D ngwa nbipute filament agba uhie
Njirimara ngwaahịa
- N'efu na afụ:Emebere ya ma rụpụta ya iji kwe nkwa ahụmịhe mbipụta dị nro na kwụsiri ike na njuju PLA ndị a.Mkpọcha zuru oke maka awa 24 tupu ịkwakọ ngwaahịa na oghere ejiri ihe desiccants mechie n'ime akpa PE.
- Tangle efu na mmiri adịghị:TORWELL Red PLA filament 1.75mm na-akpachapụ anya nke ọma ka ọ ghara ịkpaghasị nsogbu.A na-akpọnwụ ya ma mechie ya n'ime akpa PE nke nwere ihe eji eme ihe.Biko gafere filament site na oghere a kapịrị ọnụ ka ịzere tangles mgbe ejiri ya.
- Ndakọrịta dị ọnụ ahịa yana sara mbara:Na n'elu 11 years'3D filaments R & D ahụmahụ, ọtụtụ puku tọn filaments mmepụta kwa ọnwa, TORWELL bụ ike n'ichepụta ụdị ọ bụla nke filaments na nnukwu ọnụ ọgụgụ na premium àgwà, nke na-eme ka 3d filament na-eri-irè na a pụrụ ịdabere na kasị nkịtị 3D. ndị na-ebi akwụkwọ, dị ka MK3, Ender 3, Monoprice FlashForge na ndị ọzọ.
| Brand | Torwell |
| Ihe onwunwe | Ọkọlọtọ PLA (NatureWorks 4032D / ngụkọta-Corbion LX575) |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Ebe nchekwa | Akọrọ na ventilashion |
| DỊtọ ntọala | 55˚C maka awa 6 |
| Ihe nkwado | Tinye ya naTOrwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctn akpa rọba mechiri emechi nwere ihe nchacha |
Ndị na-eme ihe nkiri
* Clog-Free & Bubble-Free
* Obere-tangle ma dị mfe iji
* Nkwekọrịta nha na nkwekọ
* Enweghị mgbaghara
* Environment enyi na enyi
* Jiri ọtụtụ ebe
Agba ndị ọzọ
Agba dị:
| Agba agba | Ọcha, Black, Red, Blue, Yellow, Green, Nature, |
| Agba ndị ọzọ | Silver, Grey, Skin, Gold, Pink, Purple, Orange, Yellow-Gold, Wood, Christmas green, Galaxy blue, Sky blue, transperent |
| Usoro fluorescent | Fluorescent Red, Fluorescent Yellow, Fluorescent Green, Fluorescent Blue |
| Usoro ìhè | Green na-egbuke egbuke, na-acha anụnụ anụnụ |
| Usoro na-agbanwe agba | Akwụkwọ ndụ akwụkwọ ndụ na-acha anụnụ anụnụ ruo odo odo, Blue ruo ọcha, Purple ka Pink, Grey ruo White |
| Nabata Agba PMS ndị ahịa | |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọtaIhe nbipute PLA 3D filamentya na desiccant na ngwugwu vaccum
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri enwere ike)
Igbe 8 kwa katọn (katọn nha 44x44x19cm)
Ụlọ ọrụ mmepụta ihe
Ndụmọdụ maka mbipụta 3D
1. Ọkwa akwa
Tupu ebipụta akwụkwọ, ị nwere ike iji mpempe akwụkwọ chọpụta ebe dị n'etiti nozzle na akwa n'ọtụtụ ebe n'ofe akwa.Ma ọ bụ ị nwere ike ịwụnye ihe mmetụta ihe nrịbama akwa iji megharịa usoro ahụ.
2. Ịtọpụta ezigbo okpomọkụ
Ihe dị iche iche ga-enwe okpomọkụ dị mma dị iche iche.Ọzọkwa gburugburu ga-eme ka ezigbo okpomọkụ obere iche.Ọ bụrụ na ebipụta okpomọkụ dị elu, filament ga-abụ eriri.Ọ bụrụ na ọ dị ngwa ngwa, ọ gaghị arapara n'àkwà, ma ọ bụ kpatara nsogbu mkpuchi.Ị nwere ike ịhazigharị ya dị ka nkuzi filament ma ọ bụ kpọtụrụ anyị teknụzụ maka nkwado.
3. Nhicha na filament ihicha ma ọ bụ ịgbanwe nozzle tupu ebipụta bụ ụzọ dị irè isi belata jam.
4. Chekwaa filament nke ọma.
Jiri ngwugwu vaccum ma ọ bụ igbe kpọrọ nkụ mee ka ọ kpọọ nkụ.
Gịnị kpatara na filament adịghị arapara n'àkwà a na-ewu ụlọ ngwa ngwa?
- Okpomọkụ.Biko lelee ntọala ọnọdụ okpomọkụ (akwa na nozzle) tupu ibipụta ma tọọ ya ka ọ dị mma;
- Ịkwado.Biko lelee ma ihe ndina dị larịị, hụ na nozzle adịghị anya ma ọ bụ dị nso na akwa;
- Ọsọ.Biko lelee ma ọsọ mbipụta nke oyi akwa mbụ ọ dị oke ọsọ.
Kpọtụrụ anyị maka nkọwa ndị ọzọ info@torwell3d.com.
| Njupụta | 1.24 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 3.5(190℃/2.16kg) |
| Okpomọkụ agbagọ | 53℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Elongation na ezumike | 11.8% |
| Ike Flexural | 90 MPa |
| Modulus Flexural | 1915 MPa |
| IZOD Mmetụta Ike | 5.4kJ/㎡ |
| Ịdị ogologo | 4/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 190-220 ℃ |
| Okpomọkụ bed(℃) | 25-60 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | Na 100% |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Nhọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
