PLA filament ọcha maka mbipụta 3D
Site na ahụmịhe afọ iri na otu karịa nke onye nrụpụta, TORWELL anyị na-agba mbọ ime ka ahụmịhe mbipụta 3D ọ bụla dị mfe ma na-eju afọ. Anyị ji obi anyị niile na-ahụ na ị na-enweta nsonaazụ kacha mma na mbipụta ọ bụla ị na-ebipụta. Anyị na-enye ndị okike na ndị na-emepụta ihe mmepụta ihe dị elu na oke nha nke eriri mbipụta 3D ka ha wee mee ka echiche ha dị ndụ ma tinye agba pụrụ iche ha n'ụwa a.
Atụmatụ Ngwaahịa
| Brand | Torwell |
| ihe | PLA ọkọlọtọ (NatureWorks 4032D / Total-Corbion LX575) |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.02mm |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| DNtọala Rying | 55˚C maka awa isii |
| Ihe nkwado | Tinye akwụkwọ naTOrwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
| Ngwugwu | 1kg/spool; 8spools/ctn ma ọ bụ 10spools/ctn Akpa plastik emechiri emechi nwere ihe nhicha mmiri |
Agba Ndị Ọzọ
Agba dị:
| Agba nkịtị | Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Okike, |
| Agba ọzọ | Ọlaọcha, Isi awọ, Akpụkpọ ahụ, Ọlaọcha, Pink, Ọcha odo odo, Oroma, Ọlaọcha edo edo, Osisi, Akwụkwọ ndụ Krismas, acha anụnụ anụnụ Galaxy, acha anụnụ anụnụ eluigwe, Na-acha ọcha |
| Usoro Fluorescent | Uhie Na-acha Ọcha, Odo Na-acha Ọcha, Akwụkwọ Ndụ Na-acha Ọcha, Anụnụ Na-acha Ọcha |
| Usoro na-egbuke egbuke | Akwụkwọ Ndụ Na-egbukepụ egbukepụ, acha anụnụ anụnụ na-egbukepụ egbukepụ |
| Usoro mgbanwe agba | acha anụnụ anụnụ akwụkwọ ndụ akwụkwọ ndụ gaa odo akwụkwọ ndụ, acha anụnụ anụnụ gaa ọcha, acha odo odo gaa pink, isi awọ gaa ọcha |
| Nabata agba PMS nke ndị ahịa | |
Ihe ngosi nlereanya
Ngwugwu
1kg mpịakọtaPLA filament ọchaya na ihe nhicha ahụ n'ime ngwugwu ọgwụ mgbochi.
Ngwunye ọ bụla dị n'ime igbe nkeonwe (igbe Torwell, igbe Neutral, ma ọ bụ igbe ahaziri ahazi dị).
Igbe 8 kwa katọn (nha katọn 44x44x19cm).
Ụlọ Ọrụ Mmepụta Ihe
Ajụjụ Ndị A Na-ajụkarị
A: Ngwaahịa anyị gụnyere PLA, PLA+, ABS, HIPS, Nylon, TPE Flexible, PETG, PVA, Osisi, TPU, Metal, Biosilk, Carbon Fiber, ASA filament, eriri mkpịsị 3D wdg.
A: Ee, obere ọnụọgụ maka iwu nnwale dị.
A: Zipu arịrịọ zuru ezu gị→Nzaghachi site na nkọwa →Kwenye nkwupụta ma kwụọ ụgwọ →Mee mmepụta →Nnwale mmepụta →Nnwale ihe nlele (Nkwenye) →Mmepụta buru ibu →Nlele ịdị mma →Nnyefe →Mgbe ọrụ gasịrị →Nye iwu ọzọ...
A: Dabere n'ụdị ngwaahịa ahụ, akwụkwọ ikike dị site na ọnwa 6-12.
A: Anyị nwere ike inye gị ihe nlele n'efu maka ule, mana onye ahịa na-akwụ ụgwọ mbupu.
A: Ọ na-abụkarị ụbọchị 3-5 maka ihe nlele ma ọ bụ obere iwu. 7-15 ụbọchị ka ego ahụ gachara, a na-anata ya maka nnukwu iwu. Ga-akwado oge nkọwa zuru ezu mgbe ị tinyere iwu ahụ.
| Njupụta | 1.24 g/cm3 |
| Ndepụta Mmiri Gbazee (g/10min) | 3.5(190℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 53℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Ogologo oge na ezumike | 11.8% |
| Ike nke Flexural | 90 MPa |
| Modulu Flexural | 1915 MPa |
| Ike Mmetụta IZOD | 5.4kJ/* |
| Ogologo oge | 4/10 |
| Mbipụta | 9/10 |
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 190 – 220℃ Akwadoro 215℃ |
| Okpomọkụ akwa(℃) | 25 – 60°C |
| Nha nozulu | ≥0.4mm |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 40 – 100mm/s |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
