PLA Silk 3D filament acha anụnụ anụnụ 1.75mm
Atụmatụ Ngwaahịa
TorwellA na-emepụta eriri igwe eji ebi akwụkwọ SILK 3D PLA karịsịa maka mbipụta anyị kwa ụbọchị. Site na atụmatụ nke udidi na-egbuke egbuke ma dị mfe ibipụta, mgbe ọ bụla anyị na-ebipụta ihe ịchọ mma ụlọ, ihe egwuregwu na egwuregwu, ezinụlọ, ejiji, ihe nlereanya, Torwell SILK 3D PLA filament bụ nhọrọ magburu onwe ya mgbe niile.
| Akara | Torwell |
| ihe | ihe mejupụtara polima Pearlescent PLA (NatureWorks 4032D) |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.03mm |
| Ogologo | 1.75mm(1kg) = 325m |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 55˚C maka awa isii |
| Ihe nkwado | Tinye Torwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
| Ngwugwu | 1kg/spool; 8spools/ctn ma ọ bụ 10spools/ctn Akpa plastik emechiri emechi nwere ihe nhicha mmiri |
[Melite eriri Silk PLA]
N'ihi ihe e ji emepụta akwụkwọ ikike kachasị ọhụrụ, eriri Silk PLA Blue na-adị ire ụtọ ma na-egbuke egbuke karịa mgbe ọ bụla. Ihe ị na-ebipụta na 3D ga-egbuke egbuke dịka ọ dị na foto ndị a, ọ dịghị ihe karịrị akarị. Anyị bụ ọkachamara na eriri silk PLA ma na-eweta ahụmịhe okike kacha mma nke mbipụta 3D.
[Enweghị Tangle ma dị mfe ibipụta]
Ejiri usoro mmepụta dị mma, iji belata mgbasa ozi na mbelata, iji jide n'aka na mbipụta ya na-enweghị afụ na enweghị jam, e kechiri ya nke ọma ma ghara ịgbanwe agbanwe, ọ dị mfe ibipụta ma mee ka ọ dị nro site na arụmọrụ mbipụta kwụsiri ike.
[Izi ezi na nkwekọ nha]
Sistemụ nha dayameta CCD dị elu na sistemụ njikwa onwe onye na-eme ka mmepụta ahụ kwe nkwa eriri PLA ndị a nke dayameta 1.75 mm, Izi ezi +/- 0.03 mm nke ga-enye gị mbipụta 3D dị nro.
[Ndakọrịta dị ọnụ ala ma dịkwa obosara]
Site na ahụmịhe R&D nke ihe karịrị afọ iri na otu nke eriri 3D, Torwell nwere ike imepụta ụdị eriri niile n'ọtụtụ buru ibu na mma dị elu, nke na-eme ka eriri Torwell dị ọnụ ala ma dịkwa nchebe maka ọtụtụ igwe nbipute 3D a na-ahụkarị, dịka MK3, Ender 3, Monoprice FlashForge na ndị ọzọ.
Agba Ndị Ọzọ
Agba dị
| Agba nkịtị | Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Ọlaọcha, Isi awọ, Ọlaedo, Oroma, Pink |
| Nabata agba PMS nke ndị ahịa | |
Ihe ngosi nlereanya
Ngwugwu
A na-etinye eriri Spool ọ bụla n'ime akpa vacuum emechiri emechi, iji mee ka ọ kpọọ nkụ ma nọgide na-arụ ọrụ ya nke ọma ruo ogologo oge.
1kg mpịakọta PLA Silk 3D filament nwere ihe mkpofu na ngwugwu ihe mkpofu
Ngwunye ọ bụla dị n'ime igbe nkeonwe (Igbe Torwell, igbe Neutral, ma ọ bụ igbe ahaziri ahazi dị)
Igbe 8 kwa katọn (nha katọn 44x44x19cm)
Ụlọ Ọrụ Mmepụta Ihe
Ajụjụ Ndị A Na-ajụkarị
A: Jide n'aka na okpomọkụ mbipụta ahụ dabara nke ọma na ọsọ mbipụta. Ịkwesịrị ịgbanwe okpomọkụ mbipụta ahụ ka ọ bụrụ 200-220℃.
A: Silk PLA nwere udidi silk, elu dị larịị na ike siri ike, nke na-adịghị mma maka ibipụta ụdị dị elu ma ọ bụ obere nha.
A: Dayameta eriri na-adịghị agbanwe agbanwe, obere okpomọkụ na mgbanwe ugboro ugboro na ụdị eriri dị iche iche ga-ebute nsogbu a. Ya mere, tupu ịmalite, hichaa eriri ahụ ma bulie okpomọkụ ahụ elu ruo uru kwesịrị ekwesị.
A: Anyị ga-eji ihe ndị a na-egwe ihe mee ka ihe ndị ahụ ghara iru mmiri, wee tinye ha n'ime igbe katọn ahụ iji chebe mmebi n'oge njem.
Nye ihe nlele n'efu maka nnwale. Naanị zitere anyị ozi-einfo@torwell3d.comMa ọ bụ Skype alyssia.zheng.
Anyị ga-aza gị ajụjụ n'ime awa iri abụọ na anọ.
| Njupụta | 1.21 g/cm3 |
| Ndepụta Mmiri Gbazee (g/10min) | 4.7(190℃/2.16kg) |
| Okpomọkụ Gbagọrọ Agbagọ | 52℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Ogologo oge na ezumike | 14.5% |
| Ike nke Flexural | 65 MPa |
| Modulu Flexural | 1520 MPa |
| Ike Mmetụta IZOD | 5.8kJ/㎡ |
| Ogologo oge | 4/10 |
| Mbipụta | 9/10 |
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 190 – 230℃ Akwadoro 215℃ |
| Okpomọkụ akwa(℃) | 45 – 65°C |
| Nha nozulu | ≥0.4mm |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 40 – 100mm/s |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
Gịnị mere eriri ndị ahụ enweghị ike ịrapara n'elu akwa ọkụ?
1). Lelee ọnọdụ okpomọkụ tupu ibipụta ya, okpomọkụ nke SILK PLA filament dị ihe dịka 190-230℃;
2). Lelee ma ọ bụrụ na ejirila elu efere ahụ ruo ogologo oge, a na-atụ aro ka ị tinye gluu PVA;
3). Ọ bụrụ na oyi akwa mbụ ahụ enweghị njikọ na-adịghị mma, a na-atụ aro ka e jiri ihe e ji ebipụta ya mee ka ọ dị larịị iji belata anya dị n'etiti ihe mkpuchi ahụ na efere elu;
