Filament Silk PLA 3D nke nwere elu na-egbuke egbuke, 1.75mm 1KG/Spool
Atụmatụ Ngwaahịa
Ihe pụrụ iche dị na eriri obibi akwụkwọ Torwell silk PLA bụ ọdịdị ya dị nro ma na-egbuke egbuke, nke yiri udidi nke silk. eriri a nwere ngwakọta pụrụ iche nke PLA na ihe ndị ọzọ nke na-enye ihe e biri ebi mma nke ọma. Na mgbakwunye, eriri silk PLA nwere ihe ndị dị mma maka igwe, gụnyere ike nrụgide dị elu, mgbanwe dị mma, na nrapado oyi akwa dị mma, nke na-eme ka ihe e biri ebi sie ike ma dịgide ogologo oge.
| Akara aha | Torwell |
| ihe | ihe mejupụtara polima Pearlescent PLA (NatureWorks 4032D)) |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.03mm |
| Ogologo | 1.75mm(1kg) = 325m |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 55˚C maka awa 6 |
| Ihe nkwado | Tinye Torwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Reprap,Ultimaker, End3, Creality3D,Raise3D,Prusa i3,Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
Agba Ndị Ọzọ
Agba dị:
| Agba nkịtị | Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Ọlaọcha, Isi awọ, Ọlaedo, Oroma, Pink |
| Nabata agba PMS nke ndị ahịa | |
Emepụtara dịka Sistemụ Agba A Na-ahazi:
A na-emepụta eriri agba ọ bụla anyị na-emepụta dịka usoro agba ọkọlọtọ dị ka Pantone Color Matching System si dị. Nke a dị mkpa iji hụ na agba agba na-agbanwe agbanwe na otu ọ bụla yana inye anyị ohere ịmepụta agba pụrụ iche dịka agba ọla na agba ahaziri ahazi.
Ihe ngosi nlereanya
Ngwugwu
Nkọwa nkwakọ ngwaahịa:
1kg mpịakọta eriri silk nwere ihe na-ekpo ọkụ na ngwugwu ihe nhicha.
Ngwunye ọ bụla dị n'ime igbe nkeonwe (igbe Torwell, igbe Neutral, ma ọ bụ igbe ahaziri ahazi dị).
Igbe 8 kwa katọn (nha katọn 44x44x19cm).
Nchekwa nke ọma nke eriri silk PLA dị oke mkpa maka ịnọgide na-enwe àgwà na ịdị mma ya. A na-atụ aro ka a debe eriri ahụ n'ebe dị jụụ ma kpọọ nkụ, ebe anwụ na-acha kpọmkwem na mmiri. Ikpughe ya na mmiri nwere ike ime ka ihe ahụ mebie ma metụta ịdị mma nke mbipụta ya. Ya mere, ọ dị mma ịchekwa ihe ahụ n'ime akpa mechiri emechi nke nwere ngwugwu mmiri iji gbochie mmiri ịmịkọrọ.
Asambodo:
ROHS; REACH; SGS; MSDS; TUV
| Njupụta | 1.21 g/cm3 |
| Ndepụta Mmiri Na-agbaze (g/10min) | 4.7(190℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 52℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Ogologo oge na ezumike | 14.5% |
| Ike nke Flexural | 65 MPa |
| Modulu Flexural | 1520 MPa |
| Ike Mmetụta IZOD | 5.8kJ/* |
| Ogologo oge | 4/10 |
| Mbipụta | 9/10 |
WGịnị mere ị ga-eji họrọ Torwell Silk PLA 3D filament?
1. Filament silk Torwell PLA dị n'ọdịdị ya mara mma nke ukwuu. Ma e jiri ya tụnyere ihe PLA ọdịnala, filament silk PLA nwere elu dị nro, nke na-eme ka ọ dị mma nke ukwuu n'ụdị e biri ebi. Na mgbakwunye, filament silk PLA nwere ọtụtụ agba ịhọrọ iji bipụta ụdị ahụ.
2.Ihe e ji mara eriri Torwell Silk PLA bụ na o nwere ike dị ike n'ime ya. Ọ bụghị naanị na ọ nwere ike ịdọkpụ na ịgbagọ agbagọ nke ọma, kamakwa ọ na-arụ ọrụ nke ọma n'ịgbagọ na ịgbagọ agbagọ. Nke a na-eme ka eriri silk PLA dị mma maka ibipụta ụfọdụ ihe ndị chọrọ arụmọrụ igwe dị elu, dịka imewe ụlọ ọrụ mmepụta ihe, akụkụ igwe, na ihe ndị ọzọ.
3.Torwell Silk PLA filament nwekwara ezigbo iguzogide okpomọkụ na nkwụsi ike kemịkalụ. Okpomọkụ mgbanwe okpomọkụ ya dị elu ruo 55°C, nke nwere ike ịrụ ọrụ na gburugburu okpomọkụ dị elu, ma nwee ezigbo iguzogide UV na nchara kemịkalụ.
4.Uru nke eriri Torwell Silk PLA bụ na ọ dị mfe ibipụta na nhazi ya. Ma e jiri ya tụnyere ihe ndị ọzọ, eriri Torwell Silk PLA nwere ezigbo ike ịgbagharị na njikọta, nke na-eme ka ọ dị mfe nhazi. N'oge usoro mbipụta, ọ gaghị enwe nsogbu na mkpọchi ma ọ bụ ịda. N'otu oge ahụ, enwere ike ibipụta eriri silk PLA site na iji ọtụtụ igwe nbipute FDM 3D, nke na-eme ka ọ dabara adaba maka ọtụtụ ngwa mbipụta 3D dị iche iche.
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 190 – 230℃Akwadoro 215℃ |
| Okpomọkụ akwa (℃) | 45 – 65°C |
| NoNha Zl | ≥0.4mm |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 40 – 100mm/s |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
Biko rụba ama:
Ntọala mbipụta maka eriri Silk PLA yiri nke PLA ọdịnala. Okpomọkụ mbipụta akwadoro dị n'etiti 190-230°C, yana okpomọkụ akwa dị n'etiti 45-65°C. Ọsọ mbipụta kacha mma dị ihe dịka 40-80 mm/s, elu oyi akwa ahụ kwesịrị ịdị n'etiti 0.1-0.2mm. Agbanyeghị, ọ dị mkpa ịmara na ntọala ndị a nwere ike ịdị iche dabere na ngwa nbipute 3D a na-eji, a na-atụkwa aro ka ị gbanwee ntọala dịka ndụmọdụ nke onye nrụpụta si dị.
Iji nweta nsonaazụ kacha mma site na iji eriri mbipụta silk PLA, a na-atụ aro ka ị jiri ihe mkpuchi nwere dayameta nke 0.4 mm ma ọ bụ karịa. Obere dayameta ihe mkpuchi na-enyere aka inweta nkọwa dị mma na ịdị mma elu ka mma. Na mgbakwunye, a na-atụ aro ka ị jiri ihe mkpuchi oyi n'oge usoro mbipụta iji gbochie ịla n'iyi ma melite ịdị mma mbipụta zuru oke.
