Silk Na-egbuke egbuke agba ngwa ngwa Gradient Mgbanwe egwurugwu agba agba 3D PLA Filament
Atụmatụ Ngwaahịa
Ihe pụrụ iche dị na eriri silk PLA nke Torwell bụ agba ya. Ihe mejupụtara ya bụ ngwakọta nke PLA na ihe ndị ọzọ, nke na-emepụta mmetụta gradient nke ọtụtụ agba na ihe e biri ebi, na-eme ka ọ dị mma maka imepụta ihe nka na ihe ịchọ mma. Na mgbakwunye, eriri silk PLA nke Torwell nwere ihe eji arụ ọrụ dị mma na elu na-egbuke egbuke, na-eme ka ojiji dị elu ma na-adịgide adịgide nke ihe e biri ebi.
| Akara aha | Torwell |
| ihe | ihe mejupụtara polima Pearlescent PLA (NatureWorks 4032D)) |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.03mm |
| Ogologo | 1.75mm(1kg) = 325m |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 55˚C maka awa 6 |
| Ihe nkwado | Tinye Torwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Reprap,Ultimaker, End3, Creality3D,Raise3D,Prusa i3,Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
Ihe ngosi nlereanya
Agba dị iche iche nke egwurugwu silk metal:
Agba ya bụ Gradient, ihe dị ka mita 3-5 nke ọ bụla na-agbanwe agba, ọ na-agbanwe agbanwe site n'otu agba gaa na nke ọzọ; Ọ dị egwu ibipụta ọtụtụ agba pụrụ iche n'otu eriri Spool nke na-akwado ihe ọhụrụ na imewe gị n'ụwa mbipụta 3D nke ọma!
Asambodo:
ROHS; REACH; SGS; MSDS; TUV
| Njupụta | 1.21 g/cm3 |
| Ndepụta Mmiri Na-agbaze (g/10min) | 4.7(190℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 52℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Ogologo oge na ezumike | 14.5% |
| Ike nke Flexural | 65 MPa |
| Modulu Flexural | 1520 MPa |
| Ike Mmetụta IZOD | 5.8kJ/* |
| Ogologo oge | 4/10 |
| Mbipụta | 9/10 |
1. Iji nweta mmetụta mbipụta kacha mma site na iji eriri silk PLA nke nwere ọtụtụ agba, a na-atụ aro ka ị jiri dayameta nke 0.4 mm ma ọ bụ obere. Obere dayameta nke oghere nwere ike nweta nkọwa zuru ezu na ịdị mma elu ka mma. Okpomọkụ mbipụta akwadoro dị n'etiti 200-220°C, yana okpomọkụ akwa dị n'etiti 45-65°C. Ọsọ mbipụta kacha mma dị ihe dị ka 50-60 mm/s, na elu oyi akwa kwesịrị ịdị n'etiti 0.1-0.2 mm.
2. Jide n'aka na ị rụnyere nsọtụ eriri ahụ mgbe ejiri ya oge ọ bụla, dịka itinye nsọtụ eriri ahụ n'ime oghere ahụ iji zere eriri ahụ ka ọ ghara ịbanye n'ime ya maka oge ọzọ.
3. Iji mee ka eriri gị dị ogologo, biko debe ya n'ime akpa ma ọ bụ igbe akọrọ ma mechie emechi.
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 190 – 230℃Akwadoro 215℃ |
| Okpomọkụ akwa (℃) | 45 – 65°C |
| NoNha Zl | 0.4mm |
| Ọsọ Fan | Na 100% |
| Ọsọ Mbipụta | 40 – 100mm/s |
| Ihe ndina a na-ekpo ọkụ | Nhọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
Ndụmọdụ maka ibipụta akwụkwọ:
1) Iji nweta mmetụta mbipụta kacha mma site na iji eriri silk PLA nke nwere ọtụtụ agba, a na-atụ aro ka ị jiri dayameta nke 0.4 mm ma ọ bụ obere. Obere dayameta nke oghere nwere ike nweta nkọwa zuru ezu na ịdị mma elu ka mma. Okpomọkụ mbipụta akwadoro dị n'etiti 200-220°C, yana okpomọkụ akwa dị n'etiti 45-65°C. Ọsọ mbipụta kacha mma dị ihe dị ka 50-60 mm/s, na elu oyi akwa kwesịrị ịdị n'etiti 0.1-0.2 mm.
2) Jide n'aka na ị rụnyere njedebe eriri ahụ mgbe ejiri ya oge ọ bụla, dịka itinye nsọtụ eriri ahụ n'ime oghere ahụ iji zere eriri ahụ ka ọ ghara ịbanye n'ime ya maka oge ọzọ.
3) Iji mee ka eriri gị dị ogologo, biko debe ya n'ime akpa ma ọ bụ igbe akọrọ ma mechie emechi.
