English
PLA gbakwunyere1

Torwell ABS Filament 1.75mm, Ọcha, Ezigbo nha +/- 0.03 mm, ABS 1kg Spool

Torwell ABS Filament 1.75mm, Ọcha, Ezigbo nha +/- 0.03 mm, ABS 1kg Spool Foto a na-egosipụta
  • Torwell ABS Filament 1.75mm, Ọcha, Ezigbo nha +/- 0.03 mm, ABS 1kg Spool
  • Torwell ABS Filament 1.75mm, Ọcha, Ezigbo nha +/- 0.03 mm, ABS 1kg Spool
  • Torwell ABS Filament 1.75mm, Ọcha, Ezigbo nha +/- 0.03 mm, ABS 1kg Spool

Torwell ABS Filament 1.75mm, Ọcha, Ezigbo nha +/- 0.03 mm, ABS 1kg Spool

Nkọwa:

Ịkwụsi ike na Ịdịgide Elu:ABS a na-ejikarị eme ihe bụ Torwell ABS Roll, nke bụ polima thermoplastic siri ike ma sie ike—ọ dị mma maka imepụta akụkụ ndị kwesịrị iguzogide okpomọkụ dị elu; N'ihi nkwụsi ike dị elu na nhọrọ nhazi dị iche iche (ịcha ájá, eserese, gluu, njupụta), eriri Torwell ABS bụ ezigbo nhọrọ maka mmepụta injinịa ma ọ bụ imepụta ihe.

Izi ezi na nkwekọ nha:Nha nha dayameta CCD dị elu na sistemụ njikwa onwe onye na-agbanwe agbanwe n'ime mmepụta na-ekwe nkwa eriri ABS ndị a nke dayameta 1.75 mm, izi ezi nha +/- 0.05 mm; 1 kg spool (2.2lbs).

Isi na-esi obere, obere mgbagwoju anya na enweghị afụfụ:E ji ígwè pụrụ iche e ji polymerized ABS resin mee eriri Torwell ABS, nke nwere obere ọdịnaya na-agbanwe agbanwe ma e jiri ya tụnyere resin ABS ọdịnala. Ọ na-enye ezigbo mma mbipụta, na-esi isi nke ọma ma na-ebelata oge a na-ebipụta ya. Ọ na-akpọ nkụ nke ọma ruo awa iri abụọ na anọ tupu e jiri vacuum kpụọ ya. A chọrọ ụlọ e tinyere n'ime ya maka ịdị mma mbipụta na ogologo oge mgbe a na-ebipụta akụkụ buru ibu na eriri ABS.

Nhazi Kachasị Mma na Mfe Ojiji:Nhazi grid n'elu maka nhazi dị mfe; yana ogologo/ihe nlele ibu na oghere nlele na reel ka i wee nwee ike ịchọpụta eriri ndị fọdụrụ ngwa ngwa; ọtụtụ oghere mkpọchi filaments maka ebumnuche idozi na reel; Nhazi dayameta dị n'ime spool buru ibu na-eme ka nri dị nro.


  • Agba:Ọcha; na agba 35 maka nhọrọ
  • Nha:1.75mm/2.85mm/3.0mm
  • Nha ịbụ:1kg/spool

    • Nkọwapụta

    Usoro Ngwaahịa

    Kwado Ntọala Mbipụta

    Akara Ngwaahịa

    Atụmatụ Ngwaahịa

    eriri ABS

    ABS bụ eriri na-eguzogide mmetụta nke ukwuu, nke na-eguzogide okpomọkụ nke na-emepụta imewe siri ike ma mara mma. ABS bụ nke a na-ahụkarị maka imepụta ihe nlereanya bara uru, ọ na-adị mma ma ọ bụrụ na ọ na-eme ka ọ dị mma ma ọ bụ na-enweghị ya. Mee ka nkà gị ruo n'ókè ma kwe ka ihe okike gị gbapụ.

    Akara aha Torwell
    ihe QiMei PA747
    Dayameta 1.75mm/2.85mm/3.0mm
    Nha ịbụ 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool
    Mkpokọta nha 1.2Kg/spool
    Ndidi ± 0.03mm
    Ogologo 1.75mm(1kg) = 410m
    Gburugburu Ebe Nchekwa Akọrọ ma nwee ikuku
    Ntọala Ịkpọcha 70˚C maka awa isii
    Ihe nkwado Tinye Torwell HIPS, Torwell PVA
    Nkwado Asambodo CE, MSDS, Reach, FDA, TUV, SGS
    Dakọtara na Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ

    Agba Ndị Ọzọ

    Agba dị:

    Agba nkịtị Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Okike,
    Agba ọzọ Ọlaọcha, Isi awọ, Akpụkpọ ahụ, Ọlaọcha, Pink, Ọcha odo odo, Oroma, Ọlaọcha edo edo, Osisi, Akwụkwọ ndụ Krismas, acha anụnụ anụnụ Galaxy, acha anụnụ anụnụ eluigwe, Na-acha ọcha
    Usoro Fluorescent Uhie Na-acha Ọcha, Odo Na-acha Ọcha, Akwụkwọ Ndụ Na-acha Ọcha, Anụnụ Na-acha Ọcha
    Usoro na-egbuke egbuke Akwụkwọ Ndụ Na-egbukepụ egbukepụ, acha anụnụ anụnụ na-egbukepụ egbukepụ
    Usoro mgbanwe agba acha anụnụ anụnụ akwụkwọ ndụ akwụkwọ ndụ gaa odo akwụkwọ ndụ, acha anụnụ anụnụ gaa ọcha, acha odo odo gaa pink, isi awọ gaa ọcha
    agba eriri

    Ihe ngosi nlereanya

    Ụdị mbipụta

    Ngwugwu

    1kg mpịakọta ABS filament nwere ihe mkpofu na ngwugwu vaccum.
    Ngwunye ọ bụla dị n'ime igbe nkeonwe (igbe Torwell, igbe Neutral, ma ọ bụ igbe ahaziri ahazi dị).
    Igbe 8 kwa katọn (nha katọn 44x44x19cm).

    ngwugwu

    Ụlọ Ọrụ Mmepụta Ihe

    NGWAAHỊA

    Ihe Dị Mkpa

    Nhazi mbipụta akwadoro maka eriri ABS nwere ike ịdịtụ iche na eriri ndị ọzọ; biko gụọ nkọwa dị n'okpuru, ị nwekwara ike nweta ụfọdụ aro bara uru site n'aka onye na-ekesa mpaghara Torwell ma ọ bụ Torwell Service Team.

    Gịnị mere ị ga-eji họrọ Torwell ABS Filament?

    Ihe Ndị E Ji Eme Ihe
    N'agbanyeghị ihe ọrụ ọhụrụ gị chọrọ, anyị nwere eriri nke dabara na mkpa ọ bụla, site na iguzogide okpomọkụ na ogologo oge, ruo na mgbanwe na mpụta na-enweghị isi. Katalọgụ zuru oke anyị na-enye nhọrọ ndị ịchọrọ iji nyere gị aka ịrụ ọrụ ahụ ngwa ngwa na mfe.

    Ogo
    Ndị na-ebi akwụkwọ na-ahụ eriri Torwell ABS n'anya maka nhazi ha dị elu, na-enye nkwụsịtụ, afụfụ na mbipụta na-enweghị ihe ndọpụ. A na-ekwe nkwa na spool ọ bụla ga-enye arụmọrụ kachasị elu enwere ike. Nke ahụ bụ nkwa Torwell.

    Agba
    Otu n'ime ihe kacha mkpa n'ihe gbasara mbipụta ọ bụla bụ agba. Agba Torwell 3D na-egbuke egbuke ma na-egbuke egbuke. Gwakọta ma jikọta ihe osise primaries na-egbuke egbuke na agba ndị nwere obere ihe na-egbuke egbuke na ihe ndị na-egbuke egbuke na-egbuke egbuke, nke e ji ákwà kpuchie, nke na-egbuke egbuke, nke na-apụta ìhè, na ọbụna eriri osisi na-eṅomi mabụl.

    Ntụkwasị obi
    Tụkwasị Torwell obi na mbipụta gị niile! Anyị na-agba mbọ ime ka mbipụta 3D bụrụ usoro na-atọ ụtọ ma na-enweghị njehie nye ndị ahịa anyị. Ọ bụ ya mere e ji hazie eriri ọ bụla nke ọma ma nwalee ya nke ọma iji chekwaa oge na mgbalị gị oge ọ bụla ị na-ebipụta ya.

    Ajụjụ Ndị A Na-ajụkarị

    1. Onye nrụpụta ka ọ bụ naanị ụlọ ọrụ azụmaahịa?

    Anyị bụ naanị ndị nrụpụta ngwaahịa Torwell niile ziri ezi.

    2. Ụzọ ịkwụ ụgwọ dị?

    T/T, PayPal, Western Union, Alibaba, Visa, MasterCard.

    3. Usoro ndị a na-anabata?

    Anyị na-anabata EXW, FOB Shenzhen, FOB Guangzhou, FOB Shanghai na DDP US, Canada, UK, ma ọ bụ Europe.

    4. Ụlọ nkwakọba ihe ndị dị n'ofe osimiri?

    Ee, Torwell nwere ụlọ nkwakọba ihe na UK, Canada, US, Germany, Italy, France, Spain, na Russia. A na-ahazi ihe ndị ọzọ.

    5. Akwụkwọ ikike ngwaahịa?

    Dabere n'ụdị ngwaahịa ahụ, akwụkwọ ikike dị site na ọnwa 6-12.

    6. Ọrụ OEM ma ọ bụ ODM?

    Anyị na-enye ọrụ abụọ a na MOQ nke nkeji 1000.

    7. Ịtụ ihe nlele?

    Ị nwere ike ịtụ ihe dị ka otu nkeji iji nwalee ya site n'ụlọ nkwakọba ihe anyị ma ọ bụ ụlọ ahịa dị n'ịntanetị.

    8. Nhota okwu?

    Please contact us by email (info@torwell3d.com) or by chat. We will respond to your inquiry within 8 hours.

    9. Ụbọchị ọrụ na oge ọrụ?

    Oge ọrụ anyị bụ elekere asatọ na ọkara nke ụtụtụ - elekere isii nke mgbede (Mọnde-Satọdee)

    10. Ajụjụ ọzọ?

    Please contact us via (info@torwell3d.com)

  • Nke gara aga:
  • Osote:
    • Njupụta 1.04 g/cm3
    Ndepụta Mmiri Na-agbaze (g/10min) 12 (220℃ / 10kg)
    Okpomọkụ Gbagọrọ Agbagọ 77℃, 0.45MPa
    Ike ọdụdọ 45 MPa
    Ogologo oge na ezumike Pasentị iri anọ na abụọ
    Ike nke Flexural 66.5MPa
    Modulu Flexural 1190 MPa
    Ike Mmetụta IZOD 30kJ/㎡
    Ogologo oge 8/10
    Mbipụta 7/10

    Ntọala mbipụta eriri ABS

    Okpomọkụ nke ihe na-ewepụta ihe (℃) 230 – 260℃Akwadoro 240℃
    Okpomọkụ akwa(℃) 90 – 110°C
    Nha nozulu ≥0.4mm
    Ọsọ Fan Ọ dị ala maka ịdị mma elu ka mma / Gbanyụọ maka ike ka mma
    Ọsọ Mbipụta 30 – 100mm/s
    Ihe ndina a na-ekpo ọkụ A chọrọ
    Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI
    Dee ozi gị ebe a zitere anyị ya

    Ngwaahịaedemede

    Lekwasị anya n'inye ihe ngwọta mong pu maka afọ ise.

    Pịa "Enter" iji chọọ ma ọ bụ "ESC" iji mechie