1.75mm ọcha PETG Filament maka mbipụta 3D
Njirimara ngwaahịa
PETG bụ filament ngwa nbipute 3D ama ama."G" na-anọchi anya "glycol-modified".Mgbanwe a na-eme ka filament doo anya karị, na-adịchaghị nro ma dị mfe iji.PETG bụ ezigbo etiti n'etiti ABS na PLA.Mgbanwe na ịdịte aka karịa PLA ma dị mfe ibipụta karịa ABS.
| Ụdị | Torwell |
| Ihe onwunwe | SkyGreen K2012/PN200 |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Ogologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| Ntọala ihicha | 65˚C maka awa 6 |
| Ihe nkwado | Tinye na Torwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Nweta, FDA, TUV, SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctnakpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị
| Agba agba | White, Black, Red, Blue, Yellow, Green, Grey, Silver, Orange, Transparent |
| Agba ndị ọzọ | Agba ahaziri dị |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta PETG filament nwere desiccant na ngwugwu vaccum.
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri ahazi).
8 igbe kwa katọn (katọn nha 44x44x19cm).
Rịba ama: Ụgbọ mmiri ọ bụla nke ụgbọ mmiri TORWELL PETG n'ime akpa rọba a na-emegharị, ma dị na 1.75 na 2.85 mm format nke a pụrụ ịzụta dị ka 0.5kg, 1kg, ma ọ bụ 2kg spools, ọbụna 5kg ma ọ bụ 10kg spool dị ma ọ bụrụ na ndị ahịa chọrọ.
Ụlọ ọrụ mmepụta ihe
FAQ
A: Ụlọ ọrụ anyị dị na Shenzhen City, China.Nabata ileta ụlọ ọrụ anyị.
A: A na-eji ngwá ọrụ akpaaka zuru oke mee ihe ahụ, na igwe na-agbanye waya na-akpaghị aka.n'ozuzu, a gaghị enwe nsogbu ikuku.
A: anyị na-eji ihe ndị dị elu dị elu maka nhazi na mmepụta ihe, anyị anaghị eji ihe eji emegharị ihe, ihe mkpuchi na ihe nhazi nke abụọ, a na-ekwekwa nkwa dị mma.
A: Akụkụ ngwaahịa anyị gụnyere PLA, PLA +, ABS, HIPS, nylon, TPE Flexible, PETG, PVA, Wood, TPU, Metal, Biosilk, Carbon Fiber, ASA filament wdg.
A: Ee, anyị nwere ike.gwa anyị echiche gị.ma anyị ga-eme faịlụ nke ngwugwu gị dịka ihe ị chọrọ.
A: ee, anyị na-azụ ahịa n'akụkụ ọ bụla nke ụwa, biko kpọtụrụ anyị maka nkọwa nnyefe ụgwọ
| Njupụta | 1.27 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 20 (250 ℃/2.16kg) |
| Okpomọkụ agbagọ | 65 ℃, 0.45MPa |
| Ike ọdụdọ | 53 MPa |
| Elongation na ezumike | 83% |
| Ike Flexural | 59.3MPa |
| Modulus Flexural | 1075 MPa |
| IZOD Mmetụta Ike | 4.7kJ/㎡ |
| Ịdị ogologo | 8/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 230-250 ℃ Akwadoro 240 ℃ |
| Okpomọkụ bed(℃) | 70-80 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | LOW maka ogo elu ka mma / Gbanyụọ maka ike ka mma |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Achọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
