PETG transperent 3D filament doro anya
Njirimara ngwaahịa
| Brand | Torwell |
| Ihe onwunwe | SkyGreen K2012/PN200 |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Logologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| DỊtọ ntọala | 65˚C maka awa 6 |
| Ihe nkwado | Tinye ya naTOrwell HIPS, Torwell PVA |
| CNkwado nkwenye | CE, MSDS, Nweta, FDA, TUV, SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ihe ọ bụla ọzọ FDM 3D na-ebi akwụkwọ. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctn akpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị:
| Agba agba | White, Black, Red, Blue, Yellow, Green, Grey, Silver, Orange, Transparent |
| Agba ndị ọzọ | Agba ahaziri dị |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta PETG filament nwere desiccant na ngwugwu vaccum.
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri ahazi).
8 igbe kwa katọn (katọn nha 44x44x19cm).
Ụlọ ọrụ mmepụta ihe
FAQ
1.Ebee ka isi ahịa ahịa dị?
North Amercia, South Amercia, Europe, Africa, Asia wdg.
2. Ogologo oge ole ka oge ndu?
Na-emekarị 3-5 ụbọchị maka sample ma ọ bụ obere iji.7-15 ụbọchị mgbe nkwụnye ego na-enweta maka nnukwu iji.Ga-akwado oge ntụzịaka nkọwa mgbe ị nyere iwu.
3. Gịnị bụ ọkọlọtọ ngwugwu?
Mbupu ndị ọkachamara:
1) Igbe agba agba Torwell.
2) Mkpokọta na-anọpụ iche na-enweghị ozi ụlọ ọrụ ọ bụla.
3) Igbe ika nke gị dị ka arịrịọ gị si dị.
4. Kedu usoro mbupu?
Maka ibu LCL, anyị na-ahazi ụlọ ọrụ ngwa ngwa a pụrụ ịdabere na ya iji kwọga ha n'ụlọ nkwakọba ihe ndị na-ebuga ya.
ⅡMaka ibu FLC, akpa ahụ na-aga ozugbo na ntinye ụlọ ọrụ.Ndị ọrụ na-ebu ọrụ ọkachamara anyị, tinyere ndị ọrụ forklift anyị na-ahazi nbudata ahụ n'usoro dị mma ọbụna na ọnọdụ na-ebufe ibu kwa ụbọchị.
Ⅲ.Njikwa data ọkachamara anyị bụ nkwa nke mmelite ozugbo yana njikọta na ndepụta nkwakọ eletriki niile, akwụkwọ ọnụahịa.
5. Kedu ka m ga-esi nweta ụfọdụ sample?
Anyị nwere ike ịnye ihe nlele n'efu maka ule, ndị ahịa kwesịrị ịkwụ ụgwọ mbupu.
| Njupụta | 1.27 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 20 (250 ℃/2.16kg) |
| Okpomọkụ agbagọ | 65 ℃, 0.45MPa |
| Ike ọdụdọ | 53 MPa |
| Elongation na ezumike | 83% |
| Ike Flexural | 59.3MPa |
| Modulus Flexural | 1075 MPa |
| IZOD Mmetụta Ike | 4.7kJ/㎡ |
| Ịdị ogologo | 8/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 230-250 ℃Akwadoro 240 ℃ |
| Okpomọkụ bed(℃) | 70-80 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | LOW maka ogo elu ka mma / Gbanyụọ maka ike ka mma |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Achọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
