PETG 3D ngwa nbipute Filament 1kg spool odo
Njirimara ngwaahịa
• TORWELL PETG filament nwere ikike ibu dị mma na ike ike dị elu, mmetụta na-eguzogide ma na-adịgide adịgide karịa PLA.Ọ na-enweghị isi nke na-enye ohere mfe obibi n'ime ụlọ.Ọ bụ ụdị rọba ọkụ ọhụrụ.
• Na-enweghị mkpuchi na afụ:Ejiri patent Clog-Free chepụtara ma rụpụta ya iji kwenye ahụmịhe obibi akwụkwọ dị nro ma kwụsie ike.Nhicha zuru ezu maka awa 24 tupu ịwụnye ihe mkpuchi aluminom, nke nwere ike ichebe filament PETG nke ọma site na mmiri.Dị ka ihe PETG na-enwe mmetụta maka mmiri mmiri, biko cheta itinyeghachi ya n'ime akpa foil aluminom nke a na-emechi emechi n'oge mgbe ejiri ya mee ihe iji nọgide na-ebi akwụkwọ dị mma.
• Obere obere ma dị mfe iji:Igwe ikuku zuru oke na nyocha akwụkwọ ntuziaka siri ike, nke na-ekwe nkwa na PETG filaments dị ọcha ma dị mfe inye nri;Nhazi dị n'ime spool buru ibu na-eme ka nri dị nro.
• Na-arụ ọrụ ma kwekọọ n'ụzọ zuru oke na ndị na-ebi akwụkwọ 1.75mm FDM 3D niile, ekele maka ụkpụrụ dị elu n'ihe gbasara n'ichepụta ziri ezi na obere ndidi na dayameta nke +/- 0.03mm.
| Ụdị | Torwell |
| Ihe onwunwe | SkyGreen K2012/PN200 |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.02mm |
| Ogologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| Ntọala ihicha | 65˚C maka awa 6 |
| Ihe nkwado | Tinye na Torwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Nweta, FDA, TUV, SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8 spools/ctn ma ọ bụ 10spools/ctn akpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị
| Agba agba | White, Black, Red, Blue, Yellow, Green, Grey, Silver, Orange, Transparent |
| Agba ndị ọzọ | Agba ahaziri dị |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta PETG filament nwere desiccant na ngwugwu vaccum.
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri ahazi).
8 igbe kwa katọn (katọn nha 44x44x19cm).
Ụlọ ọrụ mmepụta ihe
FAQ
A: Ụlọ ọrụ anyị dị na Shenzhen City, China.Nabata ileta ụlọ ọrụ anyị.
A: Ogo bụ ihe kacha mkpa. Anyị na-etinye aka na njikwa mma mgbe niile site na mmalite ruo na njedebe. Ụlọ ọrụ anyị enwetala CE, asambodo RoHS.
A: Ọtụtụ mgbe 3-5 ụbọchị maka sample ma ọ bụ obere iji.7-15 ụbọchị mgbe nkwụnye ego na-enweta maka nnukwu iji.Ga-akwado oge ntụzịaka nkọwa mgbe ị nyere iwu.
A: Oge ụlọ ọrụ anyị bụ 8:30 am - 6:00 pm (Mon-Sat)
A: Mbupu ụgbọ elu na oke osimiri nwekwara nhọrọ.Oge mbupu dabere na anya.
| Njupụta | 1.27 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 20(250℃/2.16kg) |
| Okpomọkụ agbagọ | 65℃, 0.45MPa |
| Ike ọdụdọ | 53 MPa |
| Elongation na ezumike | 83% |
| Ike Flexural | 59.3MPa |
| Modulus Flexural | 1075 MPa |
| IZOD Mmetụta Ike | 4.7kJ/㎡ |
| Ịdị ogologo | 8/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 230-250 ℃Akwadoro 240 ℃ |
| Okpomọkụ bed(℃) | 70-80 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | LOW maka ogo elu ka mma / Gbanyụọ maka ike ka mma |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Achọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
