Ihe obibi akwụkwọ PETG 3D Agba ojii
Atụmatụ Ngwaahịa
| Akara | Torwell |
| ihe | SkyGreen K2012/PN200 |
| Dayameta | 1.75mm/2.85mm/3.0mm |
| Nha ịbụ | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Mkpokọta nha | 1.2Kg/spool |
| Ndidi | ± 0.02mm |
| Ogologo | 1.75mm(1kg) = 325m |
| Gburugburu Ebe Nchekwa | Akọrọ ma nwee ikuku |
| Ntọala Ịkpọcha | 65˚C maka awa isii |
| Ihe nkwado | Tinye Torwell HIPS, Torwell PVA |
| Nkwado Asambodo | CE, MSDS, Reach, FDA, TUV, SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ngwa nbipute FDM 3D ọ bụla ọzọ |
| Ngwugwu | 1kg/spool; 8spools/ctn ma ọ bụ 10spools/ctnAkpa plastik emechiri emechi nwere ihe nhicha mmiri |
Agba Ndị Ọzọ
Agba dị:
| Agba nkịtị | Ọcha, Ojii, Uhie, Anụnụ, Odo, Akwụkwọ Ndụ, Isi awọ, Ọlaọcha, Oroma, Na-acha ọcha |
| Agba ọzọ | Agba ahaziri ahazi dị |
Ihe ngosi nlereanya
Ngwugwu
1kg mpịakọta eriri PETG nwere ihe na-ekpo ọkụ na ngwugwu ọgwụ mgbochi.
Ngwunye ọ bụla dị n'ime igbe nkeonwe (igbe Torwell, igbe Neutral, ma ọ bụ igbe ahaziri ahazi dị).
Igbe 8 kwa katọn (nha katọn 44x44x19cm).
Ụlọ Ọrụ Mmepụta Ihe
Akara Ngwaahịa
Filament mbipụta 3D, Filament PETG, Filament PETG China, ndị na-ebunye Filament PETG, ndị na-emepụta Filament PETG, Filament PETG dị ọnụ ala, Filament PETG dị na ngwaahịa, ihe nlele PETG enweghị Filament, Filament PETG emere na China, Filament 3D PETG, Filament PETG 1.75mm.
Ihe kpatara ọtụtụ ndị ahịa ji ahọrọ TORWELL
E tinyere eriri anyị n'ọtụtụ mba n'ụwa. Ọtụtụ mba nwere ngwaahịa anyị.
Uru Torwell:
• Ọrụ
Onye injinia anyị ga-anọnyere gị. Anyị nwere ike inye gị nkwado teknụzụ n'oge ọ bụla.Anyị ga-esochi iwu gị, site na tupu ere ya ruo mgbe erechara ya, anyị ga-ejekwara gị ozi n'usoro a.
• Ọnụahịa
Ọnụ ahịa anyị dabere na ọnụọgụgụ ya, Anyị nwere ọnụ ahịa dị mkpa maka otu puku. Ihe ọzọkwa bụ na a ga-ezitere gị ọkụ eletrik na fan n'efu. Kabinet ahụ ga-abụ n'efu.
• Ogo
Ịdị mma bụ aha ọma anyị, anyị nwere usoro asatọ maka inyocha àgwà anyị, Site na ihe e ji arụ ọrụ ruo na ngwaahịa emechara. Ịdị mma bụ ihe anyị na-achụso.
Họrọ TORWELL, ị ga-ahọrọ ọrụ dị ọnụ ala, dị elu ma dịkwa mma.
| Njupụta | 1.27 g/cm3 |
| Ndepụta Mmiri Gbazee (g/10min) | 20(250℃/2.16kg） |
| Okpomọkụ Gbagọrọ Agbagọ | 65℃, 0.45MPa |
| Ike ọdụdọ | 53 MPa |
| Ogologo oge na ezumike | 83% |
| Ike nke Flexural | 59.3MPa |
| Modulu Flexural | 1075 MPa |
| Ike Mmetụta IZOD | 4.7kJ/* |
| Ogologo oge | 8/10 |
| Mbipụta | 9/10 |
| Okpomọkụ nke ihe na-ewepụta ihe (℃) | 230 – 250℃Akwadoro 240℃ |
| Okpomọkụ akwa(℃) | 70 – 80°C |
| Nha nozulu | ≥0.4mm |
| Ọsọ Fan | Ọ dị ala maka ịdị mma elu ka mma / Gbanyụọ maka ike ka mma |
| Ọsọ Mbipụta | 40 – 100mm/s |
| Ihe ndina a na-ekpo ọkụ | A chọrọ |
| Ebe a na-arụ ọrụ maka owuwu ndị a tụrụ aro | Iko nwere gluu, Akwụkwọ mkpuchi ihe, Teepu acha anụnụ anụnụ, BuilTak, PEI |
