Silk Dị ka Grey PLA filament 3D ngwa nbipute filament
Njirimara ngwaahịa
| Ụdị | Torwell |
| Ihe onwunwe | Ihe mejupụtara polymer Pearlescent PLA (NatureWorks 4032D) |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.03mm |
| Ogologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| Ntọala ihicha | 55˚C maka awa 6 |
| Ihe nkwado | Tinye na Torwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctn akpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị
| Agba agba | White, Black, Red, Blue, Yellow, Green, Silver, Gray, Gold, Orange, Pink |
| Nabata Agba PMS ndị ahịa | |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta silk PLA 3D ngwa nbipute Filament nwere desiccant na ngwugwu vaccum.
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri ahazi).
8 igbe kwa katọn (katọn nha 44x44x19cm).
Ụlọ ọrụ mmepụta ihe
Silk PLA filament na-atụ 1kg ma nwee dayameta ọkọlọtọ nke 1.75mm, na-eme ka ndakọrịta na ọtụtụ ụdị nbipute FDM 3D.Ọ na-ebipụta n'ụzọ dị mfe ma na-arụ ọrụ were were na obere warping ma ọ bụ ikuku afụ.Filament na-ebipụta nke ọma ma nwee nrapado dị ala, na-eme ka ọ bụrụ ikuku iji.
Filamentị silk PLA nwere ọtụtụ ihe enwere ike iji bipụta ihe dị iche iche.Ọdịdị silk ya pụrụ iche na-eme ka ọ dị mma maka ịmepụta ụdị mgbagwoju anya nke uru aesthetic dị elu.The filament dabara maka nnukwu ndochi mpaghara ma dabara adaba maka ibipụta elu oyi akwa dị obere ka 0.2mm.
Ọ bụ nhọrọ zuru oke maka ndị na-anụ ọkụ n'obi na-ebi akwụkwọ 3D na-achọ ịgbakwunye mmetụ nke ịma mma na ihe okike ha.Filament a nwere mmecha mara mma nke na-eṅomi ọdịdị na ọdịdị nke ihe silk, na-eme ka ọ dị mma maka ọla a na-ebipụta, ihe ọkpụkpụ, ma ọ bụ ihe ọ bụla eji achọ mma.
Nye ihe nlele efu maka nnwale.Naanị email anyịinfo@torwell3d.com.Ma ọ bụ Skype alyssia.zheng.
Anyị ga-azaghachi gị n'ime awa 24.
| Njupụta | 1.21 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 4.7 (190 ℃ / 2.16 n'arọ) |
| Okpomọkụ agbagọ | 52 ℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Elongation na ezumike | 14.5% |
| Ike Flexural | 65 MPa |
| Modulus Flexural | 1520 MPa |
| IZOD Mmetụta Ike | 5.8kJ/㎡ |
| Ịdị ogologo | 4/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 190-230 ℃ Akwadoro 215 ℃ |
| Okpomọkụ bed(℃) | 45-65 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | Na 100% |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Nhọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
