Silk 1.75mm Silver PLA 3D ngwa nbipute
Njirimara ngwaahịa
| Ụdị | Torwell |
| Ihe onwunwe | Ihe mejupụtara polymer Pearlescent PLA (NatureWorks 4032D) |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.03mm |
| Ogologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| Ntọala ihicha | 55˚C maka awa 6 |
| Ihe nkwado | Tinye na Torwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctnakpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị
| Agba agba | White, Black, Red, Blue, Yellow, Green, Silver, Gray, Gold, Orange, Pink |
| Nabata Agba PMS ndị ahịa | |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta silk PLA 3D ngwa nbipute Filament nwere desiccant na ngwugwu vaccum.
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri ahazi).
8 igbe kwa katọn (katọn nha 44x44x19cm).
Ụlọ ọrụ mmepụta ihe
Ozi ndị ọzọ
Emere ya site na SILK Filament - ihe eji eme ihe na-ekpo ọkụ nke a na-ejikarị na mbipụta 3D, filament a nwere ọmarịcha ọmarịcha anya nke ga-eme ka ụdị 3D gị dị ndụ.Ma ị bụ onye nwere mmasị na-ebi akwụkwọ 3D ma ọ bụ onye novice, filament a ga-egbo mkpa obibi akwụkwọ gị.
Otu n'ime ihe pụrụ iche nke Silk 1.75mm Silver PLA 3D Printer Filament bụ ike ya ịmepụta nnukwu ụdị agbagọ ngwa ngwa.Nke a na-eme ka ọ bụrụ ihe dị mma maka ngwaahịa bara uru dị ka ngwa ngwa ngwa ụlọ, ihe ịchọ mma ime na mpụta, na ndị ọzọ.Kedu ihe ọzọ, filament a dakọtara na ọtụtụ ngwa nbipute 3D, nke pụtara na ị nwere ike ịmalite ibipụta n'oge.
Silk 1.75mm Silver PLA 3D Printer Filament ọ bụghị naanị na ọ dị mma - ọ na-enyekwa ọkwa dị elu nke ịdịte aka na ike.Ihe PLA a na-eji na-ewu ya nwere okpomọkụ na-agbaze gburugburu 180-230 ° C, nke pụtara na ọ nwere ike iguzogide okpomọkụ dị iche iche na-enweghị atụfu iguzosi ike n'ezi ihe ya.Nke a na-eme ka ọ dị mma maka ịmepụta ụdị 3D dị mgbagwoju anya nke chọrọ ike dị elu na ogologo oge.
Uru ọzọ nke Silk 1.75mm silver PLA 3D ngwa nbipute filament bụ ịdị mfe ya.N'adịghị ka ụfọdụ filaments ndị ọzọ, nke a anaghị achọ ọtụtụ akụrụngwa ma ọ bụ nka pụrụ iche iji mepụta mbipụta dị elu.Naanị ihe ịchọrọ bụ ngwa nbipute 3D dakọtara na filament PLA ma ị dị mma ịga.
Na mmechi, Silk 1.75mm Silver PLA 3D Printer Filament bụ ngwaahịa ọhụrụ na-atọ ụtọ nke nwere ọtụtụ uru na ngwa ga-ebuga mbipụta 3D gị n'ọkwa ọzọ.Site na ọmarịcha anya ya na-adị mfe iji na ịdịte aka, filament a zuru oke maka ndị na-anụ ọkụ n'obi 3D nwere ahụmahụ na ndị mbido.Yabụ kedu ihe chere?Gbalịa ya taa wee hụ n'onwe gị ihe ọgbaghara bụ!
Uru Torwell
a).Onye nrụpụta, na filament 3D, yana ngwaahịa obibi akwụkwọ 3D, ọnụahịa asọmpi.
b).Ahụmịhe afọ 10 na-arụ ọrụ na ihe OEM dị iche iche
c).QC: 100% nyocha
d).Kwenye n'omume: tupu mmalite uka mmepụta anyị ga-eziga ndị ahịa tupu mmepụta samples maka nkwenye.
e).Ekwenyere obere iwu
f).QC siri ike na ogo dị elu.
g).Usoro mmepụta ihe nke ukwuu
Nye ihe nlele efu maka nnwale.Naanị email anyịinfo@torwell3d.com.Ma ọ bụ Skype alyssia.zheng.
Anyị ga-azaghachi gị n'ime awa 24.
| Njupụta | 1.21 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 4.7 (190 ℃ / 2.16 n'arọ) |
| Okpomọkụ agbagọ | 52 ℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Elongation na ezumike | 14.5% |
| Ike Flexural | 65 MPa |
| Modulus Flexural | 1520 MPa |
| IZOD Mmetụta Ike | 5.8kJ/㎡ |
| Ịdị ogologo | 4/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 190 – 230℃ akwadoro 215℃ |
| Okpomọkụ bed(℃) | 45-65 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | Na 100% |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Nhọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
