Filamenti silk Black PLA 1.75mm 3D eji ebi akwụkwọ
Njirimara ngwaahịa
| Ụdị | Torwell |
| Ihe onwunwe | Ihe mejupụtara polymer Pearlescent PLA (NatureWorks 4032D) |
| Dayameta | 1.75mm / 2.85mm / 3.0mm |
| Nha ịbụ | 1 n'arọ / spool;250 g / mkpọ;500 g / mkpọ;3kg / spool;5kg / spool;10kg / spool |
| Mkpokọta nha | 1.2kg / spool |
| Ndidi | ± 0.03mm |
| Ogologo | 1.75mm (1kg) = 325m |
| Ebe nchekwa | Akọrọ na ventilashion |
| Ntọala ihicha | 55˚C maka awa 6 |
| Ihe nkwado | Tinye na Torwell HIPS, Torwell PVA |
| Nkwanye asambodo | CE, MSDS, Reach, FDA, TUV na SGS |
| Dakọtara na | Makerbot, UP, Felix, Reprap, Ultramaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker na ndị ọzọ na-ebi akwụkwọ FDM 3D. |
| ngwugwu | 1 n'arọ / spool;8spools/ctn ma ọ bụ 10spools/ctn akpa rọba mechiri emechi nwere ihe nchacha |
Agba ndị ọzọ
Agba dị
| Agba agba | White, Black, Red, Blue, Yellow, Green, Silver, Gray, Gold, Orange, Pink |
| Nabata Agba PMS ndị ahịa | |
Ihe ngosi nlereanya
ngwugwu
1kg mpịakọta silk PLA filament nwere desiccant na ngwugwu vaccum
Nke ọ bụla spool n'ime igbe nke ọ bụla (igbe Torwell, igbe nọpụrụ iche, ma ọ bụ igbe ahaziri enwere ike)
Igbe 8 kwa katọn (katọn nha 44x44x19cm)
Ozi ndị ọzọ
Emere site na ngwakọ biopolymer ngwakọ nwere ntọala PLA, filament Silk anyị nwere ọdịdị silk mara mma ma gbakwunye ọmarịcha ọmarịcha na-egbuke egbuke na ụdị 3D gị.Torwell Silk filaments nwere pearlescent na ọla, na-eme ka ha zuo oke maka imepụta ụdị nkọwa zuru oke.
Yabụ ma ị bụ onye na-ese ihe, onye mmebe ma ọ bụ onye na-anụ ọkụ n'obi Mee N'onwe Gị, ị nwere ike ugbu a were ọrụ mbipụta akwụkwọ 3D gị n'ọkwa ọzọ site na iji filaments adịchaghị mma.Jiri ya tinye nkọwa nkecha na anya na oriọna, vases, ihe ịchọ mma ejiji, nka na ndị ọzọ.
Otu n'ime ọtụtụ uru nke silk filament anyị bụ ntụgharị ya.Dị ka ngwakọta nke ihe dị iche iche biopolymer, ọ nwere nnukwu viscosity na nghọta, na-enye gị ohere ịmepụta ụdị mgbagwoju anya, nkọwa zuru ezu na agba dị iche iche na njedebe.Ihe ndị a nwere udidi dị larịị silk, nke mere na ha na-ejikọta n'enweghị ihe ọ bụla na ihe ndị ọzọ, na-eme ka ha dị mma maka ọrụ mgbasa ozi 3D agwakọta.
Na mgbakwunye na ịma mma, Torwell Silk filaments bụ nhọrọ obibi akwụkwọ 3D na-adigide na enyi na gburugburu ebe obibi.N'iji ya na filament obibi akwụkwọ 3D ọdịnala ndị ọzọ, ihe ndị sitere na PLA na-esite na akụrụngwa emeghari ohuru, nke na-ebelata mmebi gburugburu ebe obibi.Tụkwasị na nke ahụ, ịdị nro na ike nke silk filaments na-eme ka o doo anya na ụdị gị ga-abụ ọ bụghị nanị na ọ dị mma n'anya, kamakwa ọ na-adịgide adịgide.
Iji malite iji silk PLA 3D filaments anyị, naanị ihe ị chọrọ bụ ngwa nbipute 3D nwere akwa ekpo ọkụ yana ihe extruder.Dabere na mgbagwoju anya nke ụdị ịchọrọ, ị nwere ike ịhọrọ n'etiti okpomọkụ dị iche iche site na 190-220 Celsius.Ọsọ mbipụta a tụrụ aro bụ 30mm/s, na dayameta filament dị ihe dịka 1.75mm iji hụ na mbipụta na-agbanwe agbanwe na nke ziri ezi.
Na mkpokọta, Torwell Silk PLA 3D Filament bụ nhọrọ magburu onwe ya maka onye ọ bụla na-achọ ịgbakwunye oomph na ọkaibe na ọrụ obibi akwụkwọ 3D ha.Site na mmecha ya mara mma, ịdị mma na ịdị mma gburugburu ebe obibi, ị nwere ike ugbu a na-enweghị ike ịmepụta ụdị ọkaibe na anya na-adọrọ adọrọ nke mara mma dịka ha na-adịte aka.Ya mere, bata taa, wepụta ihe okike gị wee gbanwee echiche gị ka ọ bụrụ eziokwu!
| Njupụta | 1.21 g/cm3 |
| Ndekọ mgbaze agbaze (g/10min) | 4.7 (190 ℃ / 2.16 n'arọ) |
| Okpomọkụ agbagọ | 52 ℃, 0.45MPa |
| Ike ọdụdọ | 72 MPa |
| Elongation na ezumike | 14.5% |
| Ike Flexural | 65 MPa |
| Modulus Flexural | 1520 MPa |
| IZOD Mmetụta Ike | 5.8kJ/㎡ |
| Ịdị ogologo | 4/10 |
| Nbipụta | 9/10 |
| Okpomọkụ Extruder (℃) | 190-230 ℃ Akwadoro 215 ℃ |
| Okpomọkụ bed(℃) | 45-65 Celsius C |
| Nha Nozzle | ≥0.4mm |
| Ọsọ fan | Na 100% |
| Ọsọ mbipụta | 40-100mm / s |
| Akwa akwa | Nhọrọ |
| Nrụpụta elu akwadoro | Glass nwere gluu, akwụkwọ nkpuchi, Blue Tape, BuilTak, PEI |
